DieCut Stickers

Send us your logo or use our artwork. Tell us what you want and the size you need. We are happy to give you a quote. Please email or call to order. See below for application instructions.

How to apply your die cut sticker

(read all instructions prior to laying vinyl) Step 1:Clean the area thoroughly with rubbing alcohol or soap and water. Dry well. Do not use Windex or similar products as it will leave a residue .Step 2:Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. Step 3: Carefully peel the paper or plastic backing from clear front transfer tape, the sticker should stay attached to the transfer tape. If the sticker clings to the backing, slowlyreplace the paper backing and repeat Step 2.Step 4:Slowly lay the sticker onto the desired surface and rub it in place firmly with a squeegee or credit card. Step 5Slowly peel the clear tape off at an angle. BE VERY CAREFUL not to pull the sticker off the surface. If the vinyl begins to pull up with the transfer tape, it has not been applied firmly enough. Using your smooth edge, go over the vinyl again with firm overlapping strokes, then once again attempt to remove the transfer tape.